Bench hardness tester AT130

Operating according to the Rockwell principle (ASTM E-18 - ISO6508) the AT130D series, is not influenced by deflections. The reference point for the measurements is the surface of the component itself. Surface preparation is needed only where the indentation takes place. With an easy actuation of the lever, the preload and load are applied. With the return movement, the additional load is removed, and the hardness is calculated. The complete test takes no more than 3 seconds (a few seconds longer for very soft materials).

Product advantages

Power supply 115VAC or 230VAC
Loads MOD R:
Rockwell 60kgf (N588.40) - 100kgf (N980.70) - 150kgf (N1471)
Brinell 62.5kgf (N612.90) - 125kgf (N1226) - 187.5kgf (N1839)
Rockwell 15kgf (N147) - 30kgf (N294) - 45kgf (N441)
Brinell 62.5kgf (N612.90)
Norms and certifications Rockwell - ASTM E-18 - ISO6508
Minimum measurable diameter 6mm Rockwell | 4mm Rockwell superficiale
Overall dimensions AT130DNX 30cm x 60cm x h73cm
AT130DTX 30cm x 60cm x h95cm
AT130DCAR 95cm x 33cm x h133cm
AT130DMUR 30cm x 70cm x h110cm
Working area dimensions STAND TX: max. measurable height: 240mm (400mm w/o elevating screw) depth: 225mm
STAND NX: max. measurable height: 210mm / depth: 240mm
Selectable functions scales, tolerances, calibration
Warranty 12 mesi
Output interfaces RS232
Reading on display
Load application method manual with automatic preload application
Weight AT130DNX 95kg - AT130DTX 125kg - AT130DCAR 165kg - AT130DMUR 115kg
Preload MOD DR: 10kgf (98.1N)
MOD DSR: 3kgf
Working principle MOD DR: Rockwell
MOD DSR: Superficial Rockwell
Standard scales MOD DR:
Rockwell: HRA, HRB, HRC, HRD, HRF, HRG
Brinell: HB30
other scales on request
Rockwell: HR15N, HR30N, HR45N, HR15T, HR30T, HR45T
other scales on request
Load time selectable
Download documentation

You might be interested